|Item type||Current library||Call number||Status||Date due||Barcode||Item holds|
Access a wide range of magazines and books using Pressreader and Ebook central.
Intro -- Applied Methods of the Analysis of Static and Dynamic Loads of Structures and Machines -- Preface, Committee and Sponsors -- Table of Contents -- Chapter 1: Residual Stresses - Measurement Methods and Analysis -- Utilisation Possibilities of PhotoStress Method in Determination of Residual Stresses -- 2D Residual Stress and Hardness Maps in Steel Laser Weld with Filler Wire -- Neutron Diffraction Studies of Residual Stress Distribution in the Vicinity of the Single Pass Fillet Steel Welds -- Analysis of Differential Method Used for the Evaluation of Uniform Residual Stresses by the Ring-Core Method -- Uncertainties of the Evaluation of the Hole Drilling Residual Stress Measurement According to the ASTM E837 Standard -- Residual Stress Analysis in Containers for Transport of Radioactive Materials -- Theory of Hole-Drilling Strain-Gage Method for the Using of Semiconductor Strain Gauges -- Chapter 2: Development of Experimental Methods of Analysis in Mechanics of Materials -- Experimental Investigation of Mechanical Properties of Textile Glass Reinforcement -- Numerical and Experimental Analysis of Multilayer Mine Protection -- Experimental Analysis of Hydrothermal Curing Influence on Properties of Fiber-Cement Composite -- Experimental Determination of Mechanical Properties for the Purposes of Numerical Simulations of Car Bumper Tests -- Effectiveness of the Modified Fatigue Criteria for Biaxial Loading of Notched Specimen in High-Cycle Region -- Wiles of Using Hollow Specimens for Fatigue Tests -- Digital Image Correlation as a Measurement Tool for Large Deformations of a Conveyor Belt -- Development of Mechanical Properties of Cement Paste with Different Addition of Polyvinyl Alcohol -- Experimental and Numerical Investigation of Critical Buckle Load of Composite Specimens.
Experimental and Numerical Study of Uniaxial and Multiaxial Stress-Strain Behaviour of R7T Wheel Steel -- Experimental Analysis and Numerical Modelling of Interphase Interfaces of New Environmental Low-Energy Composites -- Experimental and Numerical Investigation of Sheet Metal Behavior under Cyclic Tension-Compression Loading -- Mechanical Properties of New and Recycled PIM Feedstocks -- Influence of Combined Mean Stresses on Lifetime under High-Cycle Fatigue -- Effects of High Temperature Treatment on the Mechanical Properties of Basalt Fiber Reinforced Aluminous Composites -- Micromechanical Properties of Spruce Tissues Using Static Nanoindentation and Modulus Mapping -- Performance of Stabilized and Non-Stabilized PVA Nanofiber Textiles Subjected to Tension -- Impact of Anisotropy on the Elastic Modulus of Basic Woven Fabric Structure -- The Analyses of Pure Shear Behaviour of E-Glass Woven Fabrics by Picture Frame Test -- A Semi-Analytical Prediction of Wear Rate of an Inductively Hardened Wheel Steel under Rolling Contact -- Experimental Study of Mechanical Behavior of HPL Composites -- Stress-Controlled Fatigue Testing of E-Glass Epoxy Composite: Monitoring of Micro-Damage -- Chapter 3: Development of Experimental Methods of Analysis in Biomedical Engineering -- Characteristics of PU Foam at Long Term Static and Dynamic Loading -- About the Verification of External Fixators Applied in Traumatology and Orthopaedics -- Effect of Polyvinyl Alcohol Concentration on the Mechanical Properties of Collagen/Polyvinyl Alcohol Blends -- FEM Modelling and Experimental Analysis of Mechanical Properties of Artificial Blood Vessel -- Chapter 4: Methods and Means of Analysis the Static and Dynamic Loads of Mechanical Structures and Machines -- Estimation of Crack Depth and Profile Using DCPD Method in Full Scale Railway Axle Loaded by Rotating Bending.
Static and Dynamic Experimental Stress-Strain Analysis of Axles Loaded by Rotation Bending -- The Influence of Facet Size and Filtering on the Results of Strain Fields' Investigation Performed on Small Surfaces Using Digital Image Correlation -- Identification of Coupled Mode Shapes Based on Complex Mode Indicator Function -- Creep Deformation of High Pressure Steam Turbine Part -- Driver Seat Differential Pneumatic System with Air Damping -- Experimental Analysis of the Operational Loads on Agricultural Machine -- Comparison of Various Means of Attachment of High Temperature Strain Gauge -- Experimental Determination of Wheel and Guiding Forces on the Tracks -- Damage and Localized Corrosion in Steam Turbines -- Development of the Bus Sandwich Roof Experimental and Numerical Approach -- Analysis of the Operational Loading of the Strip Mine Conveyer Drive -- Numerical Modelling and Experimental Measurement of Lifting Platform Construction for Car Relocation -- Stress and Motion Analysis of Tram Gearbox Hinge -- Measurement of Aircraft Propeller Dynamic Loading -- Experimental Analysis of Gear Loading in Planetary Transmission -- Analysis of the Tailgate Frame Composite Tube Mechanical Properties -- Experimental and Numerical Investigation of Response of Sandwich Composite Beam Subjected to Low-Velocity Impact -- Modal Parameter Analysis for Underdamped Mechanical Systems -- Vibroisolation of Vibratory Conveyors -- Experimental Tests and FEM Simulations of Flank Breakage on Tooth of Gears with Respect to Different Nitrided Depths -- Experimental and Numerical Analysis of Vibration of the Test Stand -- Investigation of the Dynamic Behaviour of Fibres Using Simple Mechanical Systems -- Use of MBD Programs in Solving General Unbalance Simple Mechanical System -- Design and Implementation of Testing Stand for Gearboxes of Railway Vehicles.
Dynamic Operational Testing of Agricultural Trailer on a Testing Polygon -- Vibration and Noise Reduction Analysis of Sheet Metal Structures with Damping Layer -- Assessment of Reliability and Overall Life-Time of the Turbo Generator in the Kamýk Power Station -- Assessment of Reliability and Overall Life-Time of the Turbo Generator in the Lipno Power Station -- On the Performance of Single-Lap Bonded Joints with Embedded Optical Fibers -- Failure Probability of Structure and its Model -- Probabilistic Verification of Structures with Respect to Durability -- Chapter 5: New Methods of Researching and Designing in Structural Mechanics and Mechanics of Constructions -- Non-Destructive Testing of Composite Gypsum Material Properties - Long Time Measurement -- Probabilistic Parametrical Assessment of FRC Specimens -- Non-Destructive Testing during the Hardening of Alkali-Activated Slag -- Experimental Evaluation of Tensile Forces in Short Steel Rods -- Use of Digital Image Correlation to Track Strain Evolution in Compressed Masonry Piers -- Flexural Strength of Float Glass -- Experimental Verification of a Computing Model -- Do we still Need an Experiment at All? -- Dependence of Load Bearing Capacity on Homogeneity of Steel Fiber Distribution -- Finite Element Transient Dynamic Analysis of Laminated Composite Plates -- Effect of Distribution of Knots on the Strength of the Glued Laminated Timber Beams -- Methods of Non-Destructive Assessment of Timber -- Influence of Adhesive Type on Flexural Properties of Sandwich Structures -- Characteristics of Fiber Reinforced Cementitious Composites in Dependence on Casting Direction -- To Monitoring the Degradation of UHPC Boards with Textiles Armatures -- Creep of Cement Pastes with Content of Fly Ash one Year Old -- Determination of Permeability Properties of Concrete Surface Modified by CPF.
Compression Testing of Gypsum-Based Composite Reinforced by Recycled Wires from Automobile Tires -- Cohesion of Composite Reinforcement Produced from Rovings with High Performance Concrete -- Experimental Study of Primary Lining Tunnel Concrete after Thirty Years of Operation -- Optimization of Fly Ash Properties for the Use in Cement and Concrete -- Estimation of Water Absorption Capacity of Hardened Concrete with Recycled Aggregate Based on Experimental Determination -- Chapter 6: Innovation in Teaching of Applied Structural Mechanics -- New Ways of Teaching Statics and Applied Structural Mechanics to Architects -- Keywords Index -- Authors Index.
Collection of selected, peer reviewed papers from the 52nd International Scientific Conference on Experimental Stress Analysis (EAN 2014), June 2-6, 2014, Mariánské Lázne, Czech Republic. The 88 papers are grouped as follows: Chapter 1: Residual Stresses - Measurement Methods and Analysis; Chapter 2: Development of Experimental Methods of Analysis in Mechanics of Materials; Chapter 3: Development of Experimental Methods of Analysis in Biomedical Engineering; Chapter 4: Methods and Means of Analysis the Static and Dynamic Loads of Mechanical Structures and Machines; Chapter 5: New Methods of Researching and Designing in Structural Mechanics and Mechanics of Constructions; Chapter 6: Innovation in Teaching of Applied Structural Mechanics.
Description based on publisher supplied metadata and other sources.
Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2019. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.