Advanced Concepts in Mechanical Engineering I : Selected, Peer Reviewed Papers from a Collection of Papers from the 6th International Conference on Advanced Concepts in Mechanical Engineering (ACME 2014), June 12-13, 2014, Iasi, Romania.

By: Doroftei, Ioan
Contributor(s): Oprişan, Cezar | Popescu, Aristotel
Series: Applied Mechanics and Materials: Publisher: Zurich : Trans Tech Publications, Limited, 2014Copyright date: ©2014Edition: 1st edDescription: 1 online resource (759 pages)Content type: text Media type: computer Carrier type: online resourceISBN: 9783038266556Subject(s): Mechanical engineering -- CongressesGenre/Form: Electronic books. Additional physical formats: Print version:: Advanced Concepts in Mechanical Engineering I : Selected, Peer Reviewed Papers from a Collection of Papers from the 6th International Conference on Advanced Concepts in Mechanical Engineering (ACME 2014), June 12-13, 2014, Iasi, RomaniaDDC classification: 621 LOC classification: TJ5 -- .I584 2014ebOnline resources: Click to View
Contents:
Intro -- Advanced Concepts in Mechanical Engineering I -- Preface and Committees -- Table of Contents -- Chapter 1: Design and Research of Mechanisms and Machines -- Assessment of Systems for Carrying out of Planar Biaxial Tensile Test -- Compounding of Concurential Rotation Movements -- The Influence of the Pinion-Shaft Deflection on the Dynamic Characteristics of Helical Gear Pairs -- Optimization Design for Car Suspension Elastic Elements -- Consideration Regarding the Inverse Kinematics of a Rowing Skiff under the Action of the Oars Movement -- Chain Tracking System for Solar Thermal Collector -- Algorithms for Noncircular Gear Pitch Curves Generation -- Singularities Classification for Structural Groups of Dyad Type -- Transmission Indices Adoption for 6R Structural Group -- Naval Centrifugal Compressor Design Using CAD Solutions -- Naval Standard Safety Valve Design Using CAD Solutions -- Mechanical Characteristics of Electronic Printed Circuit Obtained by the Vapour Phase Soldering Process -- Evaluation of Loss of Mass due to Corrosion Using Vibration-Based Methods -- Simulation of the Tooth Helix Angle Influence on the Vibration of a Single Stage Helical Gearbox -- Some Aspects Regarding the Mathematical Modeling and Dynamic Simulation of a Single Stage Helical Gearbox -- On the Synthesis of a Five Bar Linkage for Linear Trajectory Using a CAD Analysis -- Low Speed Linear Actuator for Accurate Orientation of Concentrated Solar Convertors -- On a New Parallel Tracking System for Accurate Orientation of Concentrated Solar Convertors -- Geometrico-Static Modeling and Simulation of the Contact between Chain and Guide of a Reference Transmission -- Contribution on the Optimization of the Spur Gears Design Process Using Software Application -- Graphic Method Profiling of the End Mill Cutter Generating the Screw Compressor Rotor.
ZPA Worms - Definition and Technology -- Planetary Gear for Counter-Rotating Wind Turbines -- Virtual Model to Generate Motions on Cyclic Trajectories -- Dynamic Optimization of a Single-Seater Car Suspension System -- Structural Synthesis of Parallel Linkages by Multibody Systems Method -- Chapter 2: Mechanics of Deformable Bodies -- Some Consideration Regarding the Models for Collisions with Plastic Indentation -- Optimizing the Shape and Size of Cruciform Specimens Used for Biaxial Tensile Test -- V-Beam Thermal Actuator's Performance Analysis Using Digital Image Correlation -- Fatigue Analysis of Large Diameter Threaded Connections Subjected to Dynamic Axial Loads -- Stress Analysis and Optimal Design of the Housing of a Two-Stage Gear Reducer -- Experimental Analysis Regarding the Degree of Plastic Deformation of Fractured Surfaces under da/dN, KIc and JIc Determination -- The Influence of the Fatigue Cycles Number on Material Hardness -- Influence of Several Parameters on Simulating the Ballistic Impact on a Homogenous Plate -- An Analytical Solution for Three-Dimensional Elliptical Elastic-Plastic Rolling Contact -- Residual Stresses in Cylindrical Roller Bearings - A Three-Dimensional Analysis Model -- Design of Experimental Test Bench for Determining the Stresses and Strains State of Guitar Neck -- Mechanical Behavior of Guitar Neck under Simple Bending Stress Analyzed with Finite Elements Method -- Chapter 3: Structural Engineering -- Deployable Structures for Architectural Applications - A Short Review -- Optimal Configuration of Fluid Viscoelastic Seismic Dampers on a Ten Stories Building Using Finite Elements Method -- Influence of Non-Linear Properties of Fluid Viscoelastic Properties on Seismic Damping Properties of a Ten Stories Building Using ANSYS Program.
Experimental Determinations and Comparative Studies of the Stiffness for Some Sandwich Bars Reinforced with Metal Fabric -- Experimental Determinations of the Eigenmodes for Sandwich Bars with Different Core Reinforced with Metal Fabric -- Vibration-Based Crack Detection in L-Frames -- Chapter 4: Applied Tribology -- Influence of the Geometry on the Rolling Friction Torque in Lubricated Ball-Race Contacts -- Misalignment Effects in Cylindrical Roller Bearings -- A Comparing Tribological Study of PBT and PBT with Aramid Fibers, for Block-on-Ring Dry Regime -- Study on the Defects Size of Ball Bearings Elements Using Vibration Analysis -- Researches Concerning Friction Influence on Material Cold-Hardening in High Precision Stamping -- The Influence of the Misalignment on Load Distribution in Angular Contact Ball Bearings -- Influence of the Contact Pressure on the Rolling Resistance Moments in Dry Ball-Race Contacts -- Rolling Bearings Greases Deterioration: Structure, Chemical Composition, Rheology, Service Life Correlations -- Wear Prediction in Wheel-Rail Contact under Partial Slip Conditions -- Tribological Study of Ecological Lubricants Containing Titanium Dioxide Nanoparticles -- The Influence of Substrate on the Mechanical and Tribological Characteristics of MEMS Materials for Space Applications -- About the Friction of the Wiper Windscreen Contact -- Friction Torque Measurement in Partial Hybrid S-C Angular Contact Ball Bearings -- Wear Model of Sliding Motion Flat Surfaces Used in Mechanical Engineering -- Non Hertzian Contact Model for Tooth Contact Analysis of Spur Gear with Lead Crowning -- Dependence between the Favourable Initial (Residual) Stresses and Durability of the Ball Screws -- About an Experimental Modeling of Steel Surfaces Wear in Injection of Plastic Composites with Short Glass Fibres.
Friction in Bearings of Parallel Axes Transmissions -- Jacq Effect Influence on Thermomechanical Contact Fatigue -- Experimental Rig for Measuring Lubricant Film Thickness in Rolling Bearings -- Chapter 5: Biomechanics in Biomedical Engineering -- Stress Study of Removable Partial Denture with Attachments Using Finite Element Analysis -- Some Aspects Concerning Modeling the Eye Plant without Ocular Deviations -- Modeling of the Seated Human Body in a Vibrational Medium -- Analysis and Simulation of Gait Types with Blocked Joints -- Evaluation of Comfort Degree for Pushing/Pulling Motions under the Influence of Controlled Induced Vibrations in the Fingers-Hand-Arm Assembly -- Prehension of the Small Cylindrical Objects by the Human Fingers: Friction and Adherence Processes -- Techniques, Methods and Instruments for Human Bone Virtual Re-Construction - Main Human Movements Simulations -- Performance Optimization of Blunt-Prosthesis-Rod Complex with Tribological Considerations -- Fracture Resistance of Prosthetic Restored Teeth with Fiberglass Posts versus Metallic Posts -- 3D Analysis for Identification of the Proper Type of Post to Restore the Endodontic Treated Teeth -- Modeling and Simulation of Physical Parameters of Human Respiratory System -- New Design Concept for Reducing Torque Wear on Implant -- Interaction of Particles with the Pulmonary Interface: Effects on Surface Elasticity -- Role of Surface Industrial Finishing Process of Joint Implant UHMWPE on their Tribological Behaviour -- Modeling and Design of Prosthetic Abutment System to Evaluate the Complex Interface -- Role of Synovial Fluid Constituents on Tribological Behavior of Synovial Joints - Application for Developing Novel Therapeutic Substitutes -- Conceptual Design of a Mechatronic System for Supporting Basic Quality of Life of Bedridden Elderly People.
Modeling and Simulation Keloid Scar Formation from Biphasic Contact Blunt-Prosthesis -- The Kinematic Model with Three Degrees of Freedom Associated to the Direct Throwing in Basketball Game -- Biomechanical Aspects of the Lower Limb Positions to the Direct Free Kick at Football -- Structural and Kinematic Aspects of a New Ankle Rehabilitation Device -- Experimental Validation of a Finite Element Model of an Osteoporotic Human Femoral Bone Using Strain Gauge Measurement -- Experimental Measurement of Flexion-Extension in Normal and Osteoarthritic Knee during Sit-to-Stand Movement -- Stresses and Displacements for Virtual Models of Healthy and Osteoarthritic Knee Joint -- Chapter 6: Mechatronics, Robotics and Automated Production Systems -- Innovative Bidimensional Absolute Transducer Based on Video Detection for Positioning into Micro Assembly Processes -- Hardware Structures for High Precision Pneutronic Systems -- Proportional Hydraulic Flow Control Valves with Simple and Differential Command -- 3D CAD, CAM and Rapid Prototyping Applied for Cam Fabrication -- New Solution for Telescopic Robotic Arm -- A Workspace Characterization of the 3-RRR Planar Parallel Mechanism -- Problems Regarding Singularities Analysis of a 3-RRR Parallel Mechanism -- Low Cost Device for Experimental Tests of Electrorheological Fluids -- Hexapod Locomotion of a Leg-Wheel Hybrid Mobile Robot -- Odometry Aspects of an Omni-Directional Mobile Robot with Modified Mecanum Wheels -- Planar Robot Grasping Planning Based on Symmetry -- Teodor: A Semi-Autonomous Search and Rescue and Demining Robot -- An Overview on Accuracy and Calibration Methods for Manipulators -- Designing Search and Rescue Robots towards Realistic User Requirements -- Remote Controlled Wheeled Mobile Robot for Humanitarian Demining Purposes.
Optimal Design of the Control System for an Industrial Robot Using DOE Technique and Regression Model.
Summary: Collection of selected, peer reviewed papers from the 6th International Conference on Advanced Concepts in Mechanical Engineering (ACME 2014), June 12-13, 2014, Iasi, Romania. The 123 papers are grouped as follows: Chapter 1: Design and Research of Mechanisms and Machines, Chapter 2: Mechanics of Deformable Bodies, Chapter 3: Structural Engineering, Chapter 4: Applied Tribology, Chapter 5: Biomechanics in Biomedical Engineering, Chapter 6: Mechatronics, Robotics and Automated Production Systems.
Item type Current location Call number Status Date due Barcode Item holds
Ebrary Ebrary Afghanistan
Available EBKAF-N0002409
Ebrary Ebrary Algeria
Available
Ebrary Ebrary Cyprus
Available
Ebrary Ebrary Egypt
Available
Ebrary Ebrary Libya
Available
Ebrary Ebrary Morocco
Available
Ebrary Ebrary Nepal
Available EBKNP-N0002409
Ebrary Ebrary Sudan

Access a wide range of magazines and books using Pressreader and Ebook central.

Enjoy your reading, British Council Sudan.

Available
Ebrary Ebrary Tunisia
Available
Total holds: 0

Intro -- Advanced Concepts in Mechanical Engineering I -- Preface and Committees -- Table of Contents -- Chapter 1: Design and Research of Mechanisms and Machines -- Assessment of Systems for Carrying out of Planar Biaxial Tensile Test -- Compounding of Concurential Rotation Movements -- The Influence of the Pinion-Shaft Deflection on the Dynamic Characteristics of Helical Gear Pairs -- Optimization Design for Car Suspension Elastic Elements -- Consideration Regarding the Inverse Kinematics of a Rowing Skiff under the Action of the Oars Movement -- Chain Tracking System for Solar Thermal Collector -- Algorithms for Noncircular Gear Pitch Curves Generation -- Singularities Classification for Structural Groups of Dyad Type -- Transmission Indices Adoption for 6R Structural Group -- Naval Centrifugal Compressor Design Using CAD Solutions -- Naval Standard Safety Valve Design Using CAD Solutions -- Mechanical Characteristics of Electronic Printed Circuit Obtained by the Vapour Phase Soldering Process -- Evaluation of Loss of Mass due to Corrosion Using Vibration-Based Methods -- Simulation of the Tooth Helix Angle Influence on the Vibration of a Single Stage Helical Gearbox -- Some Aspects Regarding the Mathematical Modeling and Dynamic Simulation of a Single Stage Helical Gearbox -- On the Synthesis of a Five Bar Linkage for Linear Trajectory Using a CAD Analysis -- Low Speed Linear Actuator for Accurate Orientation of Concentrated Solar Convertors -- On a New Parallel Tracking System for Accurate Orientation of Concentrated Solar Convertors -- Geometrico-Static Modeling and Simulation of the Contact between Chain and Guide of a Reference Transmission -- Contribution on the Optimization of the Spur Gears Design Process Using Software Application -- Graphic Method Profiling of the End Mill Cutter Generating the Screw Compressor Rotor.

ZPA Worms - Definition and Technology -- Planetary Gear for Counter-Rotating Wind Turbines -- Virtual Model to Generate Motions on Cyclic Trajectories -- Dynamic Optimization of a Single-Seater Car Suspension System -- Structural Synthesis of Parallel Linkages by Multibody Systems Method -- Chapter 2: Mechanics of Deformable Bodies -- Some Consideration Regarding the Models for Collisions with Plastic Indentation -- Optimizing the Shape and Size of Cruciform Specimens Used for Biaxial Tensile Test -- V-Beam Thermal Actuator's Performance Analysis Using Digital Image Correlation -- Fatigue Analysis of Large Diameter Threaded Connections Subjected to Dynamic Axial Loads -- Stress Analysis and Optimal Design of the Housing of a Two-Stage Gear Reducer -- Experimental Analysis Regarding the Degree of Plastic Deformation of Fractured Surfaces under da/dN, KIc and JIc Determination -- The Influence of the Fatigue Cycles Number on Material Hardness -- Influence of Several Parameters on Simulating the Ballistic Impact on a Homogenous Plate -- An Analytical Solution for Three-Dimensional Elliptical Elastic-Plastic Rolling Contact -- Residual Stresses in Cylindrical Roller Bearings - A Three-Dimensional Analysis Model -- Design of Experimental Test Bench for Determining the Stresses and Strains State of Guitar Neck -- Mechanical Behavior of Guitar Neck under Simple Bending Stress Analyzed with Finite Elements Method -- Chapter 3: Structural Engineering -- Deployable Structures for Architectural Applications - A Short Review -- Optimal Configuration of Fluid Viscoelastic Seismic Dampers on a Ten Stories Building Using Finite Elements Method -- Influence of Non-Linear Properties of Fluid Viscoelastic Properties on Seismic Damping Properties of a Ten Stories Building Using ANSYS Program.

Experimental Determinations and Comparative Studies of the Stiffness for Some Sandwich Bars Reinforced with Metal Fabric -- Experimental Determinations of the Eigenmodes for Sandwich Bars with Different Core Reinforced with Metal Fabric -- Vibration-Based Crack Detection in L-Frames -- Chapter 4: Applied Tribology -- Influence of the Geometry on the Rolling Friction Torque in Lubricated Ball-Race Contacts -- Misalignment Effects in Cylindrical Roller Bearings -- A Comparing Tribological Study of PBT and PBT with Aramid Fibers, for Block-on-Ring Dry Regime -- Study on the Defects Size of Ball Bearings Elements Using Vibration Analysis -- Researches Concerning Friction Influence on Material Cold-Hardening in High Precision Stamping -- The Influence of the Misalignment on Load Distribution in Angular Contact Ball Bearings -- Influence of the Contact Pressure on the Rolling Resistance Moments in Dry Ball-Race Contacts -- Rolling Bearings Greases Deterioration: Structure, Chemical Composition, Rheology, Service Life Correlations -- Wear Prediction in Wheel-Rail Contact under Partial Slip Conditions -- Tribological Study of Ecological Lubricants Containing Titanium Dioxide Nanoparticles -- The Influence of Substrate on the Mechanical and Tribological Characteristics of MEMS Materials for Space Applications -- About the Friction of the Wiper Windscreen Contact -- Friction Torque Measurement in Partial Hybrid S-C Angular Contact Ball Bearings -- Wear Model of Sliding Motion Flat Surfaces Used in Mechanical Engineering -- Non Hertzian Contact Model for Tooth Contact Analysis of Spur Gear with Lead Crowning -- Dependence between the Favourable Initial (Residual) Stresses and Durability of the Ball Screws -- About an Experimental Modeling of Steel Surfaces Wear in Injection of Plastic Composites with Short Glass Fibres.

Friction in Bearings of Parallel Axes Transmissions -- Jacq Effect Influence on Thermomechanical Contact Fatigue -- Experimental Rig for Measuring Lubricant Film Thickness in Rolling Bearings -- Chapter 5: Biomechanics in Biomedical Engineering -- Stress Study of Removable Partial Denture with Attachments Using Finite Element Analysis -- Some Aspects Concerning Modeling the Eye Plant without Ocular Deviations -- Modeling of the Seated Human Body in a Vibrational Medium -- Analysis and Simulation of Gait Types with Blocked Joints -- Evaluation of Comfort Degree for Pushing/Pulling Motions under the Influence of Controlled Induced Vibrations in the Fingers-Hand-Arm Assembly -- Prehension of the Small Cylindrical Objects by the Human Fingers: Friction and Adherence Processes -- Techniques, Methods and Instruments for Human Bone Virtual Re-Construction - Main Human Movements Simulations -- Performance Optimization of Blunt-Prosthesis-Rod Complex with Tribological Considerations -- Fracture Resistance of Prosthetic Restored Teeth with Fiberglass Posts versus Metallic Posts -- 3D Analysis for Identification of the Proper Type of Post to Restore the Endodontic Treated Teeth -- Modeling and Simulation of Physical Parameters of Human Respiratory System -- New Design Concept for Reducing Torque Wear on Implant -- Interaction of Particles with the Pulmonary Interface: Effects on Surface Elasticity -- Role of Surface Industrial Finishing Process of Joint Implant UHMWPE on their Tribological Behaviour -- Modeling and Design of Prosthetic Abutment System to Evaluate the Complex Interface -- Role of Synovial Fluid Constituents on Tribological Behavior of Synovial Joints - Application for Developing Novel Therapeutic Substitutes -- Conceptual Design of a Mechatronic System for Supporting Basic Quality of Life of Bedridden Elderly People.

Modeling and Simulation Keloid Scar Formation from Biphasic Contact Blunt-Prosthesis -- The Kinematic Model with Three Degrees of Freedom Associated to the Direct Throwing in Basketball Game -- Biomechanical Aspects of the Lower Limb Positions to the Direct Free Kick at Football -- Structural and Kinematic Aspects of a New Ankle Rehabilitation Device -- Experimental Validation of a Finite Element Model of an Osteoporotic Human Femoral Bone Using Strain Gauge Measurement -- Experimental Measurement of Flexion-Extension in Normal and Osteoarthritic Knee during Sit-to-Stand Movement -- Stresses and Displacements for Virtual Models of Healthy and Osteoarthritic Knee Joint -- Chapter 6: Mechatronics, Robotics and Automated Production Systems -- Innovative Bidimensional Absolute Transducer Based on Video Detection for Positioning into Micro Assembly Processes -- Hardware Structures for High Precision Pneutronic Systems -- Proportional Hydraulic Flow Control Valves with Simple and Differential Command -- 3D CAD, CAM and Rapid Prototyping Applied for Cam Fabrication -- New Solution for Telescopic Robotic Arm -- A Workspace Characterization of the 3-RRR Planar Parallel Mechanism -- Problems Regarding Singularities Analysis of a 3-RRR Parallel Mechanism -- Low Cost Device for Experimental Tests of Electrorheological Fluids -- Hexapod Locomotion of a Leg-Wheel Hybrid Mobile Robot -- Odometry Aspects of an Omni-Directional Mobile Robot with Modified Mecanum Wheels -- Planar Robot Grasping Planning Based on Symmetry -- Teodor: A Semi-Autonomous Search and Rescue and Demining Robot -- An Overview on Accuracy and Calibration Methods for Manipulators -- Designing Search and Rescue Robots towards Realistic User Requirements -- Remote Controlled Wheeled Mobile Robot for Humanitarian Demining Purposes.

Optimal Design of the Control System for an Industrial Robot Using DOE Technique and Regression Model.

Collection of selected, peer reviewed papers from the 6th International Conference on Advanced Concepts in Mechanical Engineering (ACME 2014), June 12-13, 2014, Iasi, Romania. The 123 papers are grouped as follows: Chapter 1: Design and Research of Mechanisms and Machines, Chapter 2: Mechanics of Deformable Bodies, Chapter 3: Structural Engineering, Chapter 4: Applied Tribology, Chapter 5: Biomechanics in Biomedical Engineering, Chapter 6: Mechatronics, Robotics and Automated Production Systems.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2019. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.

There are no comments for this item.

to post a comment.