Engineering Materials and Tribology XXII : Baltmattrib 2013.

By: Loca, Dagnija
Series: Key Engineering Materials Vol. 604 Ser: Publisher: Durnten : Trans Tech Publications, Limited, 2014Copyright date: ©2014Edition: 1st edDescription: 1 online resource (328 pages)Content type: text Media type: computer Carrier type: online resourceISBN: 9783038264248Subject(s): Tribology -- Congresses.;Materials science -- CongressesGenre/Form: Electronic books. Additional physical formats: Print version:: Engineering Materials and Tribology XXII : Baltmattrib 2013DDC classification: 621.89 LOC classification: TJ1075.A2.E545 2014Online resources: Click to View
Contents:
Intro -- Engineering Materials & Tribology XXII -- Preface and the Organizers -- Table of Contents -- Chapter 1: Coatings and Surface Engineering -- Abrasive Wear Resistance of HVOF Sprayed and PTA-Welded Hardmetal Hard Phase Reinforced Metal-Matrix Based Coatings -- Comparative Analysis of Residual Stresses Determined by Various Methods in Brush-Plated Hard Gold and Silver Coatings -- Effect of Hot Dip Galvanizing on the Mechanical Properties of High Strength Steels -- Effect of Oxidation on Sliding Wear Behavior of NiCrSiB-TiB2 Plasma Sprayed Coatings -- Effect of ZrB2, CrB2 and TiB2 Additives on the Tribological Characteristics of NiAl-Based Gas-Thermal Coatings -- Influence of Laser Ablation Texturing on the 40NiCrMo6 Steel Surface Layer -- Influence of Laser Hardening to the Sliding Wear Resistance of the PVD (Al,Ti)N-G and nACo® Coatings -- The Microstructure of 100CrMnSi6-4 Steel after Laser Hardening -- The Scuffing Resistance of WC/C Coated Spiral Bevel Gears -- The Surface Stereometry and Microstructure of Steel 100CrMnSi6-4 after Ablation Laser Texturing -- Chapter 2: Material Mechanics and Tribology -- Characterization of Impact Abrasive Wear Produced by Different Rocks -- Contact Fatigue Life Investigations and Wear Mechanisms of Different Case Hardened and Nidrided Steels -- Deformation-Burst Schemes of 3-Piece Aerosol Containers -- Determining the Number of Peaks of Rough Surfaces Necessary for Wear Calculation -- Erosion Wear of Reactive Sintered WC-TiC-Co Cermets -- Evolution of TiN Coating Surface Roughness during Physical Vapor Deposition on High Speed Steel Substrate -- Influence of Alkali and Acidic Treatment on Sorption Properties of Latvian Illite Clays -- Influence of Coal on the Wear Behavior of Steels in 3-Body Conditions -- Influence of Material Internal Stresses to the Coefficient of Friction.
The Formation of Microstructure in High Strength Concrete Containing Micro and Nanosilica -- Tribological Testing and Modeling of Elastomeric Materials -- Chapter 3: Functional Materials -- Bi2WO6 Nanoparticles Prepared by Combustion Synthesis with Different Fuels and their Photocatalytic Activity -- Chemical and Physical Processes in the Synthesis of Romancement from Clay and Dolomite -- Effect of Grain Growth Inhibitors VC/Cr3C2 on WC-ZrO2-Ni Composite Mechanics -- Effect of Siliceous Pozzolanic Additives on the Hydration Process of Cement -- Elastic Properties and Phase Transition of Polyoxymethylene and Ethylene-Octene Copolymer Composites -- Extractive-Pyrolytic Method for Au/MeOx Nanocomposites Production -- Ferromagnetic Sorbents for Collection and Utilization of Oil Products -- Investigation of Morphology Changes on Nanocrystalline Diamond Film Surfaces during Reciprocating Sliding against Si3N4 Balls -- Multi-Component Composites Based on Polypropylene, Ethylene-Octene Copolymer and Zinc Oxide -- New Thermoshrinkable Materials of Radiation Modified Polypropylene-Elastomer Composites with Cross-Linking Agents -- Selective Oxidation of Glycerol to Glyceraldehyde over Novel Monometallic Platinum Catalysts -- The Influence of Different Molten Salt Systems on Zinc and Bismuth Tungstate Formation -- Woven Textile Moisture Sensor for Enuresis Alarm Treatment -- Chapter 4: Structural Materials -- Anisotropy of Compressive Strength in Porous Alumina Ceramics -- High Efficiency Ecological Concrete -- Properties of High Performance Concrete Containing Waste Glass Micro-Filler -- Reactive Spark Plasma Sintering of B-C-Ti-N Powders -- The Effect of Activator on the Properties of Low-Calcium Alkali-Activated Mortars -- Chapter 5: Biomaterials Engineering and Application -- Bioactivity of Silver Doped Hydroxyapatite Scaffolds in Simulated Body Fluids.
Biodegradable Flax Fiber Reinforced Eco-Composites -- Calcium Phosphate Bone Cements Reinforced with Biodegradable Polymer Fibres for Drug Delivery -- Determination of Resistance to Wear of Particulate Composite -- Effect of Mg Content on Thermal Stability of β-Tricalcium Phosphate Ceramics -- Effects of Surface Modification of Titania on In Vitro Apatite-Forming Ability -- Evaluation of Silver Ion Bioavailability from Silver Doped Hydroxyapatite -- Fast Setting Pre-Mixed Calcium Phosphate Bone Cements Based on α-Tricalcium Phosphate -- Influence of Bacteria Pseudomonas fluorescens on the Properties of Latvian Clay -- Nanostructured Calcium Phosphates for Biomedical Applications -- Scale-Up of Wet Precipitation Calcium Phosphate Synthesis -- Chapter 6: Materials for Energy and Environmental Applications -- Alkaline Activated Material for pH Control in Biotechnologies -- An Assessment of the PCM/Timber Composite in Buildings -- Application of Ion Exchange Resins in the Separation of Valuable Compounds from Wood Pyrolysis Liquids -- Composite Material for Effective Cheese Whey Anaerobic Digestion -- Effect of Shaping Method and Heat Treatment on Microstructure and Thermoelectric Properties of Titanium Dioxide -- Effect of the Acid Hydrolysis Temperature on the Conversion of Birch Wood Hemicelluloses into Furfural -- Effect of Thermal Treatment on Thermoelectric Properties of Extruded TiO2 Ceramics -- Electrochemical Studies of Nonstoichiometric TiO2-x Ceramic -- Processing and Mechanical Properties of ZrC-ZrO2 Composites -- Structure and Magnetic Properties of NdFeB Powder Prepared by Hydrogen Decrepitation and High-Energy Ball Milling -- Chapter 7: Powder Synthesis and Processing -- Application of Pulse Electromagnetic Field for Metal Coatings Manufacturing -- Heat Treatment of Ultrafine Grained High-Strength Aluminum Alloy.
Three-Body Abrasive Wear of Reactive Sintered WC-Co Hardmetals with Grain Growth Inhibitors -- Chapter 8: Materials Characterization -- Development and Research of Thermal Insulation Materials from Natural Fibres -- High Temperature Cyclic Impact/Abrasion Testing of Boiler Steels -- Influence of Metal Oxides Additives on the Porous Mullite Ceramics -- Investigation of Hydration Features of the Special Concrete with Aggregates of Various Metal Particles -- Modifiers Influence on Fibers Containing Polylactic Acid Biocomposites Exploitation Properties -- Portland Cement Based Lightweight Multifunctional Matrix with Different Kind of Additives Containing SiO2 -- Studies of TiO2 Ceramics Structure after Thermal Treatment at Different Conditions -- The Use of Sapropel in Development of Effective Thermal Insulating Materials -- Chapter 9: Hybrid Materials -- Polypropylene Composites Compounded with Natural Fibers Waste -- Keywords Index -- Authors Index.
Summary: Collection of selected, peer reviewed papers from the 22nd International Baltic Conference of Engineering Materials & Tribology (BALTMATTRIB 2013), November 14-15, 2013, Riga, Latvia. The 72 papers are grouped as follows: Chapter 1: Coatings and Surface Engineering, Chapter 2: Material Mechanics and Tribology, Chapter 3: Functional Materials, Chapter 4: Structural Materials, Chapter 5: Biomaterials Engineering and Application, Chapter 6: Materials for Energy and Environmental Applications, Chapter 7: Powder synthesis and Processing, Chapter 8: Materials Characterization, Chapter 9: Hybrid Materials. Seventy-one papers from the November 2013 conference present recent research on engineering materials from Lithuania, powder technology and advanced materials from Latvia, and powders, coatings, and tribology from Estonia. The contributors compare the abrasive wear resistance of metal matrix coatings, the fatigue of case-hardened and plasma-nitrided layers under rolling contact stress, the sorption properties of alkali and acidic Latvian illite clays, and ferromagnetic sorbents for the collection of oil products. Other topics include composites for cheese whey anaerobic digestion, thermal insulation made from natural fibers, bioactivity of silver doped hydroxyapatite scaffolds in simulated body fluids, and a woven textile moisture sensor for enuresis alarm treatment. - Composite materials. - Inorganic materials. - Materials science. - Organic materials. - Surfaces.
Item type Current location Call number Status Date due Barcode Item holds
Ebrary Ebrary Afghanistan
Available EBKAF-N0002248
Ebrary Ebrary Algeria
Available
Ebrary Ebrary Cyprus
Available
Ebrary Ebrary Egypt
Available
Ebrary Ebrary Libya
Available
Ebrary Ebrary Morocco
Available
Ebrary Ebrary Nepal
Available EBKNP-N0002248
Ebrary Ebrary Sudan

Access a wide range of magazines and books using Pressreader and Ebook central.

Enjoy your reading, British Council Sudan.

Available
Ebrary Ebrary Tunisia
Available
Total holds: 0

Intro -- Engineering Materials & Tribology XXII -- Preface and the Organizers -- Table of Contents -- Chapter 1: Coatings and Surface Engineering -- Abrasive Wear Resistance of HVOF Sprayed and PTA-Welded Hardmetal Hard Phase Reinforced Metal-Matrix Based Coatings -- Comparative Analysis of Residual Stresses Determined by Various Methods in Brush-Plated Hard Gold and Silver Coatings -- Effect of Hot Dip Galvanizing on the Mechanical Properties of High Strength Steels -- Effect of Oxidation on Sliding Wear Behavior of NiCrSiB-TiB2 Plasma Sprayed Coatings -- Effect of ZrB2, CrB2 and TiB2 Additives on the Tribological Characteristics of NiAl-Based Gas-Thermal Coatings -- Influence of Laser Ablation Texturing on the 40NiCrMo6 Steel Surface Layer -- Influence of Laser Hardening to the Sliding Wear Resistance of the PVD (Al,Ti)N-G and nACo® Coatings -- The Microstructure of 100CrMnSi6-4 Steel after Laser Hardening -- The Scuffing Resistance of WC/C Coated Spiral Bevel Gears -- The Surface Stereometry and Microstructure of Steel 100CrMnSi6-4 after Ablation Laser Texturing -- Chapter 2: Material Mechanics and Tribology -- Characterization of Impact Abrasive Wear Produced by Different Rocks -- Contact Fatigue Life Investigations and Wear Mechanisms of Different Case Hardened and Nidrided Steels -- Deformation-Burst Schemes of 3-Piece Aerosol Containers -- Determining the Number of Peaks of Rough Surfaces Necessary for Wear Calculation -- Erosion Wear of Reactive Sintered WC-TiC-Co Cermets -- Evolution of TiN Coating Surface Roughness during Physical Vapor Deposition on High Speed Steel Substrate -- Influence of Alkali and Acidic Treatment on Sorption Properties of Latvian Illite Clays -- Influence of Coal on the Wear Behavior of Steels in 3-Body Conditions -- Influence of Material Internal Stresses to the Coefficient of Friction.

The Formation of Microstructure in High Strength Concrete Containing Micro and Nanosilica -- Tribological Testing and Modeling of Elastomeric Materials -- Chapter 3: Functional Materials -- Bi2WO6 Nanoparticles Prepared by Combustion Synthesis with Different Fuels and their Photocatalytic Activity -- Chemical and Physical Processes in the Synthesis of Romancement from Clay and Dolomite -- Effect of Grain Growth Inhibitors VC/Cr3C2 on WC-ZrO2-Ni Composite Mechanics -- Effect of Siliceous Pozzolanic Additives on the Hydration Process of Cement -- Elastic Properties and Phase Transition of Polyoxymethylene and Ethylene-Octene Copolymer Composites -- Extractive-Pyrolytic Method for Au/MeOx Nanocomposites Production -- Ferromagnetic Sorbents for Collection and Utilization of Oil Products -- Investigation of Morphology Changes on Nanocrystalline Diamond Film Surfaces during Reciprocating Sliding against Si3N4 Balls -- Multi-Component Composites Based on Polypropylene, Ethylene-Octene Copolymer and Zinc Oxide -- New Thermoshrinkable Materials of Radiation Modified Polypropylene-Elastomer Composites with Cross-Linking Agents -- Selective Oxidation of Glycerol to Glyceraldehyde over Novel Monometallic Platinum Catalysts -- The Influence of Different Molten Salt Systems on Zinc and Bismuth Tungstate Formation -- Woven Textile Moisture Sensor for Enuresis Alarm Treatment -- Chapter 4: Structural Materials -- Anisotropy of Compressive Strength in Porous Alumina Ceramics -- High Efficiency Ecological Concrete -- Properties of High Performance Concrete Containing Waste Glass Micro-Filler -- Reactive Spark Plasma Sintering of B-C-Ti-N Powders -- The Effect of Activator on the Properties of Low-Calcium Alkali-Activated Mortars -- Chapter 5: Biomaterials Engineering and Application -- Bioactivity of Silver Doped Hydroxyapatite Scaffolds in Simulated Body Fluids.

Biodegradable Flax Fiber Reinforced Eco-Composites -- Calcium Phosphate Bone Cements Reinforced with Biodegradable Polymer Fibres for Drug Delivery -- Determination of Resistance to Wear of Particulate Composite -- Effect of Mg Content on Thermal Stability of β-Tricalcium Phosphate Ceramics -- Effects of Surface Modification of Titania on In Vitro Apatite-Forming Ability -- Evaluation of Silver Ion Bioavailability from Silver Doped Hydroxyapatite -- Fast Setting Pre-Mixed Calcium Phosphate Bone Cements Based on α-Tricalcium Phosphate -- Influence of Bacteria Pseudomonas fluorescens on the Properties of Latvian Clay -- Nanostructured Calcium Phosphates for Biomedical Applications -- Scale-Up of Wet Precipitation Calcium Phosphate Synthesis -- Chapter 6: Materials for Energy and Environmental Applications -- Alkaline Activated Material for pH Control in Biotechnologies -- An Assessment of the PCM/Timber Composite in Buildings -- Application of Ion Exchange Resins in the Separation of Valuable Compounds from Wood Pyrolysis Liquids -- Composite Material for Effective Cheese Whey Anaerobic Digestion -- Effect of Shaping Method and Heat Treatment on Microstructure and Thermoelectric Properties of Titanium Dioxide -- Effect of the Acid Hydrolysis Temperature on the Conversion of Birch Wood Hemicelluloses into Furfural -- Effect of Thermal Treatment on Thermoelectric Properties of Extruded TiO2 Ceramics -- Electrochemical Studies of Nonstoichiometric TiO2-x Ceramic -- Processing and Mechanical Properties of ZrC-ZrO2 Composites -- Structure and Magnetic Properties of NdFeB Powder Prepared by Hydrogen Decrepitation and High-Energy Ball Milling -- Chapter 7: Powder Synthesis and Processing -- Application of Pulse Electromagnetic Field for Metal Coatings Manufacturing -- Heat Treatment of Ultrafine Grained High-Strength Aluminum Alloy.

Three-Body Abrasive Wear of Reactive Sintered WC-Co Hardmetals with Grain Growth Inhibitors -- Chapter 8: Materials Characterization -- Development and Research of Thermal Insulation Materials from Natural Fibres -- High Temperature Cyclic Impact/Abrasion Testing of Boiler Steels -- Influence of Metal Oxides Additives on the Porous Mullite Ceramics -- Investigation of Hydration Features of the Special Concrete with Aggregates of Various Metal Particles -- Modifiers Influence on Fibers Containing Polylactic Acid Biocomposites Exploitation Properties -- Portland Cement Based Lightweight Multifunctional Matrix with Different Kind of Additives Containing SiO2 -- Studies of TiO2 Ceramics Structure after Thermal Treatment at Different Conditions -- The Use of Sapropel in Development of Effective Thermal Insulating Materials -- Chapter 9: Hybrid Materials -- Polypropylene Composites Compounded with Natural Fibers Waste -- Keywords Index -- Authors Index.

Collection of selected, peer reviewed papers from the 22nd International Baltic Conference of Engineering Materials & Tribology (BALTMATTRIB 2013), November 14-15, 2013, Riga, Latvia. The 72 papers are grouped as follows: Chapter 1: Coatings and Surface Engineering, Chapter 2: Material Mechanics and Tribology, Chapter 3: Functional Materials, Chapter 4: Structural Materials, Chapter 5: Biomaterials Engineering and Application, Chapter 6: Materials for Energy and Environmental Applications, Chapter 7: Powder synthesis and Processing, Chapter 8: Materials Characterization, Chapter 9: Hybrid Materials. Seventy-one papers from the November 2013 conference present recent research on engineering materials from Lithuania, powder technology and advanced materials from Latvia, and powders, coatings, and tribology from Estonia. The contributors compare the abrasive wear resistance of metal matrix coatings, the fatigue of case-hardened and plasma-nitrided layers under rolling contact stress, the sorption properties of alkali and acidic Latvian illite clays, and ferromagnetic sorbents for the collection of oil products. Other topics include composites for cheese whey anaerobic digestion, thermal insulation made from natural fibers, bioactivity of silver doped hydroxyapatite scaffolds in simulated body fluids, and a woven textile moisture sensor for enuresis alarm treatment. - Composite materials. - Inorganic materials. - Materials science. - Organic materials. - Surfaces.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2019. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.

There are no comments for this item.

to post a comment.