20th Brazilian Conference on Materials Science and Engineering :

Hotza, Dachamir.

20th Brazilian Conference on Materials Science and Engineering : Selected, Peer Reviewed Papers from the 20th Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 4-8, 2012, Joinville, Santa Catarina. - 1st ed. - 1 online resource (759 pages) - Materials Science Forum Ser. ; v.Vol. 775-776 . - Materials Science Forum Ser. .

Intro -- 20th Brazilian Conference on Materials Science and Engineering -- Foreword and Committees -- Table of Contents -- Chapter 1: Biomaterials -- Polyurethane Composite Membranes -- Analysis of Bone Repair Tissue after Implantation of Biomaterials and Application of Vibratory Waves -- Development of Titanium Dental Implants Using Techniques of Powder Metallurgy -- Nanostructured Titanium Surface Obtained by Electrochemical Treatment -- Mechanical and Morphological Behavior of Blends Obtained from Biopolymers (PLA/PLC) -- Obtention and Characterization of Collagen and Chitosan Based Cements for Bone Regerneration. Part 1: Extraction and Characterization of Collagen -- Development of Phosphate Glass Microspheres Containing Holmium for Selective Internal Radiotherapy -- Chapter 2: Materials Characterization -- Characterization and Study of the Moisture Expansion of Ceramic Blocks from Ceramic Masses Incorporated with Kaolin and Granite Wastes -- Thermal Activation of Palygorskite at Different Temperatures -- Physical and Microstructural Characterization of Cathode, Composite Cathode and Electrolyte Ceramics to ITSOFC -- Application of Clays in Composition of Asphaltic Masses -- Characterization of Asphalt Mix Formulated from Equations of Packing -- Properties of High Temperature Sintered Clay Ceramic Added with Multi-Wire Sawn Granite Waste -- Study of the Rheological Properties of PP/Clay Systems under Steady and Oscillatory Shear Flows -- Weibull Analysis to Characterize the Diameter Dependence of Tensile Strength in Sugarcane Bagasse Fibers -- Chacterization of Tensile Strength Dependence with Diameter of Sponge Gourd Fibers by Weibull Statistical Analysis -- Effect of the Addition of TiO2 Nanoparticles on the Sinterability of a Glass Belonging to the LZSA Glass-Ceramic System. Preparation and Characterization of A Composite Obtained through Ti (IV) and Phosphoric Acid -- Characterization of Epoxy Matrix Composites Incorporated with Sugarcane Bagasse Fibers -- Obtaining of Polyamide 6/Calcined Nickel Ferrite Composite from Different Temperatures -- Study of Heat Treatment on Phase Transformation of Ni-44,8 wt% Ti Ribbons Obtained by Melting Spinning -- Morphological Characterization of Al-2.0wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring for Thixoforming Process -- Investigation of Microstructural Changes after Solution Annealing Treatment in a Duplex Stainless Steel -- Study of the Tempering Effect in Phase Transformations of 13Cr1Ni0.15C and 13Cr2Ni0.1C Steels -- Characterization of a AISI/SAE 4340 Steel in Different Microstructural Conditions -- Microstructural Characterization of CP Steel Used in Automotive Industry -- Microstructural Characterization of Dual and Multiphase Steels Applied to Automotive Industry -- Heat Treatment as an Alternative to Brass Warping -- Structure and Properties of Quenched and Cyclic Compressed Ti-Mo Alloys -- Evaluation of the Thermal and Kinetic Behavior of the SS Obtained from the Combined Treatment of Liquid Leachate with Domestic Sewage in UASB Reactor -- Spectroscopic and Diffractional Characteristics of Membranes and Polyamide 6/Regional Bentonite Clay Nanocomposites -- Influence of the Addition of Polypropylene and Compatibilizer in PA6 Membranes Obtained by Phase Inversion -- Structural and Thermomechanical Evaluation of Bionanocomposites Obtained from Biodegradable Polymers with a Organoclay -- Tensile Strength of Polyester Composites Reinforced with Thinner Buriti Fibers -- Calcination Influence on the Structure and Morphology of Zirconia Synthesized by Combustion Reaction -- Chapter 3: Modeling. Analysis of the Influence of Liquid and of External Coating Material on the Quality of the Radiographic Image of Offshore Pipes Using Computational Modeling -- Chapter 4: Cements -- Eucalyptus Chip Ashes in Cementitious Composites -- Influence of Curing Temperature on Metakaolin-Based Geopolymers -- Chapter 5: Materials Degradetion -- Evaluation of Vulcanized Elastomeric Composites after Ageing in Biodiesel -- Electrodeposition of Polypyrrole Films on 2024 Aluminum Alloy in Phosphoric Acid Solution -- Chapter 6: Ecological Materials -- Preparation of Poly(Lactic Acid)/Bentonite Clay Bio-Nanocomposite -- Technology for Coke Production in Tunnel Kiln from Compacted Coal Powder -- Crystallization Kinetics of Iron Rich Glass-Ceramic Obtained from Waste of Steel Industry -- Characterization of Banana Fibers Functional Groups by Infrared Spectroscopy -- Infra-Red Spectroscopy Analysis of Malva Fibers -- Izod Impact Tests in Polyester Matrix Composites Reinforced with Banana Fibers -- Correlation between the Diameter and the Density of Coir Fiber Using the Weibull Statistic Methodology -- Thermal Characterization of Polyester Composites Reinforced with Ramie Fibers -- Dynamic-Mechanical Behavior of Malva Fiber Reinforced Polyester Matrix Composites -- Tensile Properties of Epoxy Composites Reinforced with Continuous Sisal Fibers -- Charpy Impact Tests in Epoxy Matrix Composites Reinforced with Continuous Sisal Fiber -- Charpy Impact Test of Epoxy Matrix Composites Reinforced with Buriti Fibers -- Dynamic-Mechanical Analysis of Polyester Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) Fiber -- Tensile Strength of Polyester Matrix Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) Fibers -- Bending Mechanical Behavior of Epoxy Matrix Reinforced with Jute Fiber. Formulation and Characterization of Polypropylene Composites Alkali Treated Bagasse Fiber -- Characterization of Curaua Fibers by Infrared Spectroscopy -- Izod Impact Tests with Polyester Matrix Reinforced with Buriti Fibers -- Fabrication of Artificial Stone from Marble Residue by Resin Transfer Molding -- Production of Synthetic Ornamental Marble as a Marble Waste Added Polyester Composite -- Alternative Coconut Fiber Surface Treatments Methods for the Development of Polymeric Matrix Composites -- Investigation to Obtain Polyols from Residual Frying Oil -- Preparation of Biodegradable Polymer Nanocomposites and Vermiculite Clay by Melt Intercalation Technique -- Chapter 7: Surface Engineering -- Effect of Application of the Shot Peening Process in the Corrosion Resistance of the AISI 430 Ferritic Stainless Steel -- Corrosion Resistance of Hybrid Films Applied on TiN Plate: Precursor Solution Acidified with Hydrochloric Acid -- Chapter 8: Materials Science and Engineering -- Particle Size Study of Smectite Clays from the City of Pedra Lavrada-PB -- Influence of Speed of Processing in the Mechanical and Thermomechanical Properties of Polyamide 6 / Organoclay Nanocomposite -- Chapter 9: Electrical Electronics and Optical Materials -- Influence of TiO2 Crystalline Structure on Dielectric Resonator Properties from ZnO-Nb2O5-TiO2 Ceramic System for Use in Telecommunications -- Chapter 10: Magnetic Materials -- The Influence of Calcination Temperature in Ni-Zn Ferrite Doped with Al3+ -- Effect of Oxygen Content during Sintering on the Losses of MnZn Ferrites -- Study of Temperature Sintering by Microwave Energy in Ferrites Ni0,5Zn0,5Fe2O4 -- Study of the Reproducibility of Ni-Zn Nanoferrite Obtained by Combustion Reaction -- Synthesis, Characterization and Catalytic Performance of Nanoferrites Subjected to the Esterification Reaction. Evaluation of the Relationship between Crystallographic Texture and Magnetic Properties through the Magnetocrystalline Anisotropy Coefficient -- Stoner-Wohlfarth Model for Nanocrystalline Anisotropic Sm2Co17 Magnets -- Nucleation as Coercivity Mechanism in NdFeB Magnets -- Chapter 11: Nanostructured Materials -- Strontium Titanate Ceramics Obtained by Conventional and Microwave Methods -- Effect of Microwave Power in Obtaining Ferrite Nanopowders Synthesized by Combustion -- Influence of Clay Content in Membrane Morphology of Polymer Polyamide 6.6/Montmorillonite Clay -- Obtaining of Polyamide 6.6 Plane Membrane Application in Oil-Water Separation -- Nanocomposites Obtained by Montmorilonite Clay Additivation in P3 (HB-8%HV) -- Evaluation of Attapulgite Clay Content from PiauĂ­ in Sorption Characterization of Water in the Polyester Matrix Composites -- Synthesis and Characterization of Biocompatible Fe3O4 for Use in Cell Hyperthermia -- Microstructural Evolution of a F138 Austenitic Stainless Steel after Deformation by ECAP and HPT -- Morphological Comparison of PEI and PES Nanocomposite Membranes with Bentonite Clay -- Analysis of the Efficiency of Surface Treatment of Bentonite Clay for Application in Polymeric Membranes -- Study of Morphology Membrane of Polymeric Nanocomposites Obtained by Phases Inversion -- Chapter 12: Materials Power Generation -- La, Sr and Co Based Coatings Obtained on Ferritic Stainless Steel by Dip-Coating Technique -- Platinum-Free Catalysts for Alkaline Polymer Electrolyte Fuel Cells -- Evaluation of the Thermal Stability of Biofuel Obtained from Oil Plant Pyrolysis and Animal Fat -- Chapter 13: Processing -- Processing of Silicas Formed by Slip Casting -- Production of Li2O-ZrO2-SiO2-Al2O3 (LZSA) Glass-Ceramic Foams by Aeration and Polymerization of Suspension. Microstructure Evolution during Fabrication of Ni-Ti-Nb SMA Wires.

Collection of selected, peer reviewed papers from the 20th Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 4-8, 2012, Joinville, Santa Catarina. The 132 papers are grouped as follows: Chapter 1: Biomaterials; Chapter 2: Materials Characterization; Chapter 3: Modeling; Chapter 4: Cements; Chapter 5: Materials Degradetion; Chapter 6: Ecological Materials; Chapter 7: Surface Engineering; Chapter 8: Materials Science and Engineering; Chapter 9: Electrical Electronics and Optical Materials; Chapter 10: Magnetic Materials; Chapter 11: Nanostructured Materials; Chapter 12: Materials Power Generation; Chapter 13: Processing; Chapter 14: Mechanical Properties; Chapter 15: Recycling; Chapter 16: Synthesis; Chapter 17: Micellaneous. The proceedings of the November 2012 conference contains 135 papers investigating biomaterials, ecological materials, magnetic materials, nanostructured materials, recycling, cements, mechanical properties, and material characterization. The Brazilian researchers evaluate titanium powder for dental implants, clay fillers in asphalt pavement, radiographic images of offshore pipes, the ageing of elastomeric composites in biodiesel engines, and an artificial stone fabricated from marble residue and resin. Other topics include platinum-free catalysts for alkaline polymer electrolyte fuel cells, the processing of silicas formed by slip casting, kaolin residue as a binder for mortars, and digital image processing for determining the hydrophobicity of polymeric materials. - Biomaterials. - Composite materials. - Inorganic materials. - Materials science. - Metals. - Organic materials.


Materials science -- Congresses.

Electronic books.

TA401.3.A15 2012eb